What’s happening on your servers? Any interesting news things you tried?
I didn’t do anyone other than updating Mastodon (native deployment) lately due to a lack of time. Reading so much about Immich caused me to consider trying it in parallel to Nextcloud but I’m not sure if I want to have everything twice.
Not quite homelab, but I’m about to install Linux Mint on my mom’s laptop and that had me thinking about creating an off-site backup in her place again since she has a fiber connection. I’m still not sure about the potential design though, but currently my only backup is in the same rack as the live stuff.
You must log in or register to comment.
almost done re setting everything up after a catastrophic failure (ended up replacing multiple drives, the CPU, the motherboard, the psu, and the ram).
now I’m just running long command after long command, waiting for drives to zero, ensuring extended smart checks pass on new drives, cloning to my backup drives…
this things been down for a few weeks and I’m so excited to have it back up soon!
anyways, moral of the story is, the 3-2-1 strategy is a good strategy for a lot of reasons. just do it, it may save your ass down the line.
I installed immich and began migrating our phones away from Google.
I am playing around with Podman Quadlet and that’s one hell of a rabbit hole. I have everything up and running, and now I need to configure the containers, and probably will deal with other pain points, etc.
The good thing is that I have documented the whole process so it is reproducible but it took me quite some time to figure out everything.
Would you mind sharing your process in a write up?
Finally managed to carve out some time since the birth of my daughter two months ago to tinker around a bit. Decided to tackle my gripe to semi-automate updating my services when there is a new release.
Now I have Renovate running on my self-hosted Forgejo instance using Forgejo’s actions and a “Podman in Podman” image for its runners. Don’t ask me why I wanted to do a PINP instead of DIND - I guess I like to punish myself. But at least this means everything I deploy is running with Podman 😄
A self hosting thing that I did after having a kid that’s helped us tremendously is hook up an internal camera to frigate to use as a baby monitor, and then have automations in home assistant to automatically change which parent gets notified about crying in the middle of the night based on an agreed-upon “shift”. Just a thought to consider :)
I have noticed that Microsoft and google are trying to scan my domain for /php-myadmin and similar links that I thankfully do not have.
I had already fail2ban running but it failed to ban a single IP. I did setup custom filters that would ban admin panel scanning attempts but somehow now it also bans my home IP and my phone 5G ip sometimes. No idea how to fix it so far. Also, this filter/jail doesnt necessarily jail everyone attempting to reach these links, just sometimes it does.
Working on getting bazarr to work with Plex, turns out it still requires radarr/sonarr even if I don’t sail the seven seas. Guess I’ll be learning the entire stack tonight :)
Installed qbittorrent and downloaded a few seasons of Linux isos onto a vps. Discovered accessing those files over SSH to be too slow to play them without buffering so installed filebrowser to get them via http which worked well.
It’s been a long long time since I used bittorrent and wow it works so much better these days.
CLOUDFLARE IS NO MORE FOR MY NETWORK
Soon I’ll drop Cloudflare for my public services too
What are you moving to?
Anubis, though I always had it before I removed Cloudflare.
Hooray!
I’ve been deploying Gitea (or Forgejo, still can’t decide), but I’ve fallen into the Ansible rabbit hole and can’t get out. Also learned Terraform in the last week and I’m still on the fence about using it in my homelab. It’s nice for the cloud but I don’t think it’s as useful on-prem.
Forgejo has everything Gitea has, with more and being more open
My concern when it forked was that forgejo would last a few months and then fizzle out.
That doesn’t seem to be the case.
I got tailscale cert to work but I feel kind of bad about learning tailscale instead of headscale
Have you looked into netbird? I have been thinking of setting that up over tailscale
I was going to read into these. What benefits do you see in headscale?
I run headscale on my VPS. The tailscale clients are already open source, though by default they connect to the companies servers for coordinating the net. Headscale is open source and replaces the companies servers with your own. Best to not rely on some corporate service, which could cease to exist or be enshittiefied.
Mainly that they can’t enshittify because they’re already open. Tailscale is great right now, and free, but who knows in 5 years
Set up Zipline to share bigger files with my friends.
I have been looking for something new.
Last week was moving Immich up to the new release I was on an old version, which meant migrating to an intermediate version to allow a database rebuild. It worked well.
I was bored this week so just ran some wattage testing.
- 15w at idle (800MHz)
- 20w active (3.4GHz)
- 30w peak at boot
What kind of hardware is it running on?
It’s an Intel i5-7700 cpu in a Gigabyte Z270N mobo. Those were chosen as a form factor fit for the Monsterlabo fanless case. (Only a select set of boards, and in this case 1151 brackets, fit the case)
I finally got my ISP to enable bridge mode on my modem.
I also learned that I didn’t lose port forwarding and related services because I had been moved behind CGNAT or transitioned to IPv6 – they simply no longer offer port forwarding to residential customers. Ruminate on the implications of that statement so I’m not the only one with blood pressure in the high hundreds.
My ISP did the same thing recently and what was most annoying is they didn’t admit to changing anything, while trying to sell me a business account.
This weekend I setup Pangolin on a budget VPS and forwarded it back home. I don’t have my VPN backup but it fixed Plex and I can access my security cameras again.
Port forwarding is done at the router/firewall, so if ports can’t be transferred its a cgnat thing they are doing. Like a Non CGNAT IP on the internet can be sent a packet on any port.
No, I got it from the horse’s mouth: my WAN address was publicly routable all along, the ISP just disabled those NAT-related features remotely.
the implication of that is weird to me. I’m not saying that the horse is wrong, but thats such a non-standard solution. That’s implementing a CGNAT restriction without the benefits of CGNAT. They would need to only allow internal to external connections unless the connection was already established. How does standard communication still function if it was that way, I know that would break protocols like basic UDP, since that uses a fire and forget without internal prompting.
It’s perfectly reasonable from the perspective of corporate scum: take away a standard feature, then sell it back as an extra. As far as I know, the modem still had UPnP for applications that rely on it.
Oh shit, that’s terrible.
I’ve had immich but went to homegalley instead. Mostly because I want to keep MY directory structure in case I’m abandoning the choosen platform. Have not regretted my choice (so far … 8 months)
I’ve been using Immich, but with my photos as external media. That lets me keep my directory structure too, but with the Immich features 🙂
You can adjust the directory structure in immich using templates
I’ve not been able to make it work reliably with photos backed up using immich on my android phone, is if working for you? I read somewhere storage templates are not very robust/reliable.
Seems to be working fine for me but i don’t do anything complex, just folders by year and month
Same, using the default storage template.
Love the post haha! Nothing much here things run rather stable and with low maintance right now.
I’m super glad I arrived this state and don’t have to do anything mostly. Just when I want to change stuff :)
I mean I still do from time to time. Breaking changes require some attention and migrations. But overall its good and not a load of daily maintance.
