First, a hardware question. I’m looking for a computer to use as a… router? Louis calls it a router but it’s a computer that is upstream of my whole network and has two ethernet ports. And suggestions on this? Ideal amount or RAM? Ideal processor/speed? I have fiber internet, 10 gbps up and 10 gbps down, so I’m willing to spend a little more on higher bandwidth components. I’m assuming I won’t need a GPU.

Anyways, has anyone had a chance to look at his guide? It’s accompanied by two youtube videos that are about 7 hours each.

I don’t expect to do everything in his guide. I’d like to be able to VPN into my home network and SSH into some of my projects, use Immich, check out Plex or similar, and set up a NAS. Maybe other stuff after that but those are my main interests.

Any advice/links for a beginner are more than welcome.

Edit: thanks for all the info, lots of good stuff here. OpenWRT seems to be the most frequently recommended thing here so I’m looking into that now. Unfortunately my current router/AP (Asus AX6600) is not supported. I was hoping to not have to replace it, it was kinda pricey, I got it when I upgraded to fiber since it can do 6.6gbps. I’m currently looking into devices I can put upstream of my current hardware but I might have to bite the bullet and replace it.

Edit 2: This is looking pretty good right now.

  • AnarchoSnowPlow@midwest.socialEnglish
    5·
    9 days ago

    I bought a protectli awhile back. Mines 4 port 2.5 gbps nics, and it runs opnsense out the box.

    You should take a look at their sfp+ model, if I were in your shoes that’s what I’d be looking at. It’s all in one, works nicely, is incredibly customizable, and is lower power usage than basically anything you’ll build yourself.

    I use that for my router/firewall, then I use an off lease dell thin client to run my home assistant server, and a standard off the shelf buffalo nas. If you’re into immich, I’ll recommend jellyfin over Plex. I used it for years but they started collecting more data, sticking their own junk in etc. Jellyfin is open source and works great.